Coming Soon
Drywall Finishing & Texture
Master professional drywall finishing, taping, texturing, and repair techniques to achieve smooth, flawless interior walls.
Tuition: $595 USD per student
Course Overview
Master the Art of Drywall Finishing
Develop the skills needed to transform raw drywall into smooth, professional-quality surfaces. This hands-on course teaches essential techniques such as taping, mudding, sanding, and applying popular textures like knockdown and orange peel, ensuring high-quality finishes and seamless repairs.
Course tuition: $595 USD per student.
Your Class Plan
What You’ll Learn
Focuses on joints, finish coats, texture, and repairs. Staged, previously dried panels allow students to practice multiple coats without pretending drying can be rushed into a weekend.
Before you start: No formal prerequisite; familiarity with drywall panels is helpful.
Planned teaching timetable: 8:30 AM–4:30 PM on Day 1 and Day 2, including breaks and lunch. This is the planned class schedule; actual class dates, daily times and venue will be confirmed before enrollment.
By the end, you should be able to
- Identify installation defects that must be corrected before finishing.
- Select joint treatment and compound for the supplied assembly and task.
- Embed tape and apply successive sample coats with feathered edges.
- Use dust-controlled preparation and match a sample texture.
- Inspect a patch under raking light and plan drying/recoat steps.
Day 1 — Foundations and guided practice
8:30–9:00
Dust/exposure controls, product labels, tool setup, and finish-level examples.
9:00–10:30
Joint types, tape and compound choices, mixing directions, and substrate checks.
10:30–10:45
Break
10:45–12:00
Demonstrate flat joints, inside corners, and fastener spots.
12:00–12:45
Lunch and drinks included
12:45–2:15
Students embed tape and apply a first coat to fresh practice panels.
2:15–2:30
Break
2:30–3:45
Use pre-dried panels to practice fill coats, feathering, and knife control.
3:45–4:30
Inspect ridges, bubbles, and shrinkage; label drying stages and correction needs.
Day 2 — Application, assessment and next steps
8:30–9:00
Review cured samples and identify what is ready for the next operation.
9:00–10:30
Dust-controlled sanding demonstration and orange-peel/knockdown sample preparation.
10:30–10:45
Break
10:45–12:00
Practice patch blending and texture matching on staged panels; inspect with raking light.
12:00–12:45
Lunch and drinks included
12:45–2:15
Complete an individual taped joint/patch station and write a finish/recoat plan.
2:15–2:30
Break
2:30–3:00
Individual knowledge test: 10 course-specific questions; 20 available points.
3:00–4:00
Individual practical/project assessment, using the course rubric and observations gathered during the project.
4:00–4:30
Feedback, correction plan, certificate eligibility review, and recommended next steps.
Your hands-on project
Produce a taped joint, an inside-corner sample, and a blended patch/texture sample using panels staged at appropriate cure/dry times. Submit an inspection and drying-sequence sheet.
Final knowledge test
Ten questions specific to Drywall Finishing & Texture, covering the skills, decisions, calculations and safety boundaries taught in this course. Each question is worth two points. Pass mark: 16 out of 20 (80%).
The instructor provides the test after training. Approved accessibility support may change how you respond while keeping the same learning standard.
Practical assessment
Complete the course project and demonstrate the skills individually. Five criteria are scored from 0–4. Pass mark: 16 out of 20 (80%), with no criterion below 2 and every critical safety check passed.
What your instructor will assess
- Apply product/dust controls and keep the station clean.
- Choose compatible tape/compound and prepare the joint.
- Embed tape without uncorrected bubbles or exposed dry areas.
- Feather the coat or texture sample to the posted finish standard.
- Identify imperfections and sequence sanding, recoating, and inspection correctly.
Training boundaries: Use clean new panels. Suspect lead/asbestos materials are recognition/referral topics only. Follow product drying requirements; no uncontrolled dry sanding.
Earn your certificate of completion
- Complete both days and all required learning activities; missed content must be made up.
- Pass the knowledge test and practical assessment separately; a strong score in one does not cancel a failed result in the other.
- Pass every critical safety check and receive the instructor’s sign-off.
If you need more practice, your instructor records the missing skills and assigns focused review and reassessment. Certificates are issued only after all requirements are met.
Your certificate records completion of this Construction Guys course. It is not a contractor license, trade license, or authorization to perform regulated work independently.
Next learning step: Interior Painting. Your instructor can help you choose based on demonstrated skills.
Course Details
Course Information
Everything you need to know before joining the Drywall Finishing & Texture course.
Duration
2-Day Boot Camp
Skill Level
Beginner
Tools Provided
Yes
Training Format
Hands-On
Materials Included
Included
Certificate
Certificate of Completion
Perfect Your Drywall Finishing Skills
Join the waitlist and be the first to know when drywall finishing enrollment opens.
